Izdelki za chlór-idrát vodný roztok (14)

Protech Fix AC-Therm Water-based anti-condensing wall covering, with excellent fixing and anchoring properties, with good coverage based on high penetration acrylic resins, 3M Glass Bubble, pigments, fillers and covering fillers. Suitable as an anti-condensation fixative primer, prior to painting or coating the plaster with anti-condensation paints or plasters (-THERM). Ideal for interventions on walls with mucilage deposits, bacterial phenomena and moulds. Due to its low thermal conductivity, it is particularly suitable for solving mould problems. It can be applied on any plaster (rustic, civil, plaster, dry mortar, plasterboard, concrete, prefabricated, exposed concrete, etc.). Made with special resins and additives it reduces the absorption of the support while allowing the necessary transpiration, uniforms the absorption making the application of the finishing coats easier. It always works in depth, which is why it is the ideal preparation for applying water-based paints or coatings. Adhesion is excellent even on particularly difficult surfaces, thanks to the use of special resins and the presence in the formulation of an adhesion promoter interacting between the support and the product. Preliminary treatment of any surface (civil, plaster, rustic, dry mortars, plasterboard, concrete, prefabricated, exposed concrete etc.) designed to isolate the support surfaces and standardise the absorptions of the subsequent anti-condensate treatments (painting and protective coatings). Packaging: 14-liter bucket UM: €/l

4-Hydroxycoumarin belongs to the group of coumarin derivatives. The intermediate is used in the pharmaceutical and agricultural industry. It is used mainly for anticoagulants such as Warfarin and rodenticides. Name:4-Hydroxycoumarine CAS Number:1076-38-6 Use:Warfarin Intermediate Use 2:Rodenticide Synonym:4-Hydroxy-2H-chromen-2-one Synonym 2:4-Coumarinol Synonym 3:Benzotetronic acid

Le Liquide Désinfectant Surface permet de désinfecter des supports, revêtements, surfaces non lessivables ou ne pouvant être désinfectées par immersion, trempage, etc... Ce produit présente un large spectre d’activité de désinfection et limite les risques de propagation microbienne entre les surfaces utilisées en commun, sans altération des plastiques, métaux ou matériaux de mobilier usuels. Conditionnement:Bidon 5L

Sodium Hypochlorite 12% Aqueous solution of sodium hypochlorite in demineralized/decalcified water, obtained from the reaction between chlorine gas and an aqueous solution of sodium hydroxide, both substances obtained with mercury-free membrane technology. Physical specifications: Green liquid with pH about 11, solved in water with boiling point of 40° C. Stability and reactions: Slowly dissolved in the air, incompatible with hydrochloric acid, ammonia, urea, metals and methanol. Handling and storage: Keep away from sun shine, acids, heat, flammable materials and organic material. Keep in a dry place. CAS number 7681-52-9 WE number,231-668-3 Chemical formula NaOCl Molar mass 74,44 g/mol Customs tariff code,28289000

Alcohol-based gel with quaternary ammonium compounds, free of dyes and perfumes, quick-drying, intended for hand hygiene. Product used in HACCP Plan.FEATURES Alcohol-based skin sanitizer with high efficacy against transient microorganisms on the skin. Product specifically formulated for hand sanitization in hospital and food facilities, among others. Contains emollient and humectant substances to maintain the skin's natural oils. FIELDS OF APPLICATION Product specifically formulated for hand hygiene in hospital and food facilities, among others. It is strongly recommended to use the product in all cases where hands can be agents of transmission of pathogenic diseases. HOW TO USE Apply the pure product (1 to 3 ml) to the palms of your hands and rub for 30 seconds until completely dry. Do not rinse with water. REF:ALI6109

High-Quality Phosphoric Acid for Sale: Phosphoric acid, a versatile chemical compound with a wide range of applications, plays a pivotal role in various industries. Whether you’re in the food and beverage, agriculture, or industrial sector, finding a reliable source for phosphoric acid is crucial. In this article, we will explore the benefits and applications of phosphoric acid and guide you on where to find it for sale. Benefits of High-Quality Phosphoric Acid for Sale: 1. *firstly Food and Beverage Industry:* Phosphoric acid is a key ingredient in many carbonated beverages. It imparts a tangy taste and serves as an effective acidulant. Additionally, it prevents the growth of mold and bacteria, extending the shelf life of these products. 2. *secondly Agriculture:* In agriculture, phosphoric acid is used as a fertilizer. It provides essential phosphorus to plants, promoting root development, flowering, and overall growth. This makes it a crucial component in improving crop yields.

Cyclopropylamin gehört zur Gruppe der primären Amine. Das Intermediat findet Anwendung in der Pharma- und Duftstoff-Industrie. Name:Cyclopropylamin Synonym:Aminocyclopropan CAS Nummer:765-30-0 Nutzung:Pharma / Duftstoff Zwischenprodukt

2-Chlorophenothiazin gehört zur Gruppe der Phenothiazin-Derivate. Das Intermediat findet Anwendung in der (Vet-)Pharma-Industrie. Ziel APIs sind: Chlorpromazin, Chloroprothazin, Cyamemazin, Perphenazin, Phenothiazine, Pipamazin, Prochlorperazin und Thiopropazat Name:2-Chlorophenothiazin Synonym:2-Chloro-10H-phenothiazin CAS Nummer:92-39-7 Nutzung:Pharma / Veterinär Zwischenprodukt Synonm:Chloro-2-pheno­tiazin

Trifluoressigsäureethylester gehört zur Gruppe der Essigsäurederivate. Das Zwischenprodukt wird in der Agro-, Elektronik-, Feinchemikalien-, Parfümerie-, Pharma- und Veterinärindustrie verwendet sowie bei der Herstellung von Celecoxib, Efavirenz, Lisinopril & Sitagliptinphosphat. Name:Tri­fluoro­essig­säure­ethyl­ester Synonym:TFAEt Synonym 2:ETFA CAS Nummer:383-63-1 API Anwendung:Celecoxib, Efavirenz, Lisinopril API Anwendung 2:Sitagliptin phosphat

El lactato de etacridina es un compuesto orgánico aromático basado en la acridina. Se utiliza principalmente como antiséptico (en forma de pomadas y soluciones) para el tratamiento de heridas infectadas y piodermas. Además, se aplica como solución de irrigación vesical y vaginal. Es eficaz contra la mayoría de las bacterias grampositivas, como los estreptococos y los estafilococos, pero ineficaz contra las bacterias gramnegativas, como Pseudomonas aeruginosa. Además, el lactato de etacridina se utiliza para la diarrea (o la profilaxis de la diarrea). En este caso, el principio activo normaliza el aumento del movimiento de los intestinos gracias a su efecto antiespasmódico. También tiene un efecto antibacteriano y reduce la permeabilidad de la pared intestinal a los fluidos. De este modo, se puede contrarrestar la diarrea. Por regla general, se administra en combinación con albuminato de tanino. Nombre:Lactato de etacridina monohidratado Número CAS:6402-23-9 Indicación:Antiséptico y antibacteriano

Crotamiton is an active pharmaceutical ingredient produced under cGMP. * only European manufacturer * competitive process * up-to-date documentation * starting materials sourced from EU (no dependence on China) Crotamitone is an antipruriginosum used to treat burial mites (scabies). It works against the mites themselves, but also against the itching. CAS:483-63-6 Product Information:API Indication:Scabicidal and antipuritic Dosage:liquid Route of Synthesis:Synthetic Loss of Exclusivity:expired in EU, US

Ketoprofen is a synthetically synthesized Active Pharmaceutical Ingredient, produced under cGMP, compliant with EP, JP monographs. Its CAS-N° reads 22071-15-4. It is used in treatment of arthritis-related inflammatory pains, severe toothaches that result in the inflammation of the gums or nerve pain. Ketoprofen is an acidic, non-opioid analgesic used for pain and inflammation. By inhibiting prostaglandin synthesis at the key enzyme cyclooxygenase, it can be used for acute and chronic pain (e.g. arthrosis and arthritides). Like most active ingredients in its class, it is poorly tolerated by the gastrointestinal tract, a particular side effect is light sensitization. Detailed specification, Certificate of Analysis and samples are available on request. CAS:22071-15-4 Product Information:API Route of Synthesis:Synthetic Patent Expiry:EU, US - expired Indication:Analgesic, Anti-inflammatory Dosage:Oral Name:Ketoprofen

Cyclen belongs to the group of cyclic polyamines. The intermediate is used in the pharmaceutical and fragrance industry. Name:Cyclen Synonym:1,4,7,10-Tetraazacyclododecane Use:DOTA Intermediate Use 2:Perfumery CAS Number:294-90-6

An anti-dust chemical/mechanical revitalising hardener for concrete flooring and screeds, consisting of an aqueous solution of mineral silicates and fluosilicates, activated by specific wetting agents. It is applied in several coats of decreasing dilution in water, with a brush or mechanical “scrubber”. Specific anti-dust treatments for industrial flooring or concrete slabs that have lost their original “vitality”. It reacts with the calcium compounds, soluble and unstable, present in of concrete products, transforming them into new stable, insoluble and resistant compounds. Consequent increases in resistance to wear and tear of the order of 200% -400%, significant increases in chemical stability, resistance to freeze-thaw cycles etc. Reactive impregnations for stabilising chemical and mechanical structures and concrete products. Hardening, anti-dust, anti abrasive and anti-corrosion treatments for concrete floorings. Adjustment of the chemical and mechanical performance of products for the industrial, rural and livestock construction (on horizontal surfaces). Apply, preferably with a brush or with "washer dryer" machine on the basis of the following indications: - Porous surfaces: repeated applications of a solution of water and QL Fluosil at a ratio in 1:1 - Compact surfaces: apply three coats, with decreasing dilution with water. 1a coat 1:3, 2a coat 1:2, 3a coat 1:1. The consumption of QL Fluosil will be proportional to the absorption of the floor to be treated. Indicatively a porous surface will consume about 400 g/m², while a surface with normal porosity will consume 250-300 g/m². Leave the product to dry between one coat and the next and then, after the last coat, wash with copious amounts of water. Protect glass and aluminium surfaces during application. Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface".